Can Three-Dimensional T1-weighted MR Imaging Visualize the Vascular Lumen after Carotid Artery Stenting?

Purpose: We aimed to evaluate the quality of various 3D T₁-weighted images (T₁WIs) of the stent lumen using a carotid stent phantom and determine the suitable T₁WI sequence for visualization of the stent lumen after carotid artery stenting. Methods: The carotid stent phantom consisted of polypropylene tubes that mimicked common carotid arteries with and without stenting. On 1.5T and 3.0T MRI scanners, transverse T₁WIs of the carotid stent phantom were obtained using 3D turbo spin-echo (TSE), 3D fast field-echo (3D-FFE), and 3D turbo field echo volumetric interpolated breath-hold examination (VIBE) under clinical conditions. The signal intensity ratio (SIR) was determined using the mean signal intensity of the stent lumen (SI_stent) divided by the lumen without a stent in each T₁WI. The SNR of the stent lumen (SNR_stent) was calculated from SI_stent divided by the standard deviation of the uniform region near the stent lumen. Results: The 3D-FFE and VIBE had higher SNR_stent than other T₁WIs and clearly visualized the stent lumen. The 3D-TSE had the lowest SIR and SNR_stent, preventing stent lumen visualization. Conclusion: T₁WIs obtained using 3D-FFE and VIBE allows stent lumen visualization.